Discontinued
Couldn't load pickup availability
Replace the dull, orange halogen factory bulbs with a pair of OLM MOAB bulbs. Each pair comes with filters to allow for a wide selection of color output.
OLM Moab LED CREE H11 XHP50 Light Bulbs
OLM's MOAB line of bulbs are designed to truly be the Mother of All Bulbs. Their compact design with passive cooling allows for easy installation in the tightest locations. This bulb is the first in OLM's line that gives the customer complete control of the output. Included are a variety of filters which will allow you to select the desired output.
Most vehicles still use standard halogen bulbs for low beams. These produce a lot of heat, draw a higher amount of current, and produce a dull orange light. The lifespan of these bulbs are also shorter than HIDs and LEDs. The MOAB will give you brilliant light with much more lumens per watt.
For the longest time, LED solutions were not able to produce enough life to be a safe alternative to halogen bulbs or HIDs. This is not the case anymore with chips such as the CREE XHP50 and CREE XM-L2.
Despite the changes in design vs stock, the bulb is still plug and play. The integrated LED driver does not have to be mounted for proper installation or a clean install.
Installation is as simple as installing a normal OEM bulb.
Color temp: 3000K / 4300K / 6500K / 8000K / 10000K
Quantity: Sold as a PAIR
Warranty: 1 year
Powered by Cree’s groundbreaking SC5 Technology™ Platform, the XLamp XHP50 LED is a member of Cree’s Extreme High Power (XHP) class of LEDs that redefines lumen density and reliability to radically reduce system costs by up to 40 percent. At its maximum current, the XHP50 LED delivers twice the light output of the industry’s brightest single-die LED, the XLamp XM-L2 LED, at a similar lumens per watt and without increasing the package footprint. The XHP50 LED also achieves longer lifetime at higher operating temperatures. The overall result is significantly lower thermal, mechanical and optical costs at the system level.
This improved resistance to heat works well with the demands of automotive applications.
When replacing lights on your vehicle with aftermarket products, current draw should always be a concern. The HP LED bulbs have a low current draw for the amount of light they output. At 14V, the current draw is only 1.4-1.5 amps. (*Voltage is typically higher than 12.5V when the alternator is running)
With OLM products, for a period of 1 year after the purchase, just e-mail us here and let us know about your issue.
Our trained staff will troubleshoot the product with you if required. They usually ask for a photo or two. If the issue still exists, we send you out a new item free of charge! You will not have to pay shipping to return your item or receive another.
Housings can vary in size across all vehicles which use 9005 bulbs. If you feel the bulb is loose, simply remove the gasket on your stock bulb and place it at the base of this bulb as seen in the picture below.
In general this will fit vehicles which use a 9005 bulb. Please verify your bulbs if your vehicle is not listed below. The sizes are listed in your owner's manual.
We only offers HID relays when they are possibly required. We have tested the current draw of this kit and found that it does not exceed the factory wiring.
